ARTTONE

ART2The design lift cabin ARTTONE is made up of narrow horizontal laminated sections.

On the back wall is placed handrail and mirror. One side wall is ready for mounting a cabin panel or button cassette.

 

 

Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC dors - door leaves are made using sandwich technology, glazed or solid versions

At the back of the cabin are vent holes of square or round cross-sections.

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

 

 

                       art art SHORA ArtTone Predek  ArtTone Shora

                                                     ArtTone YELLOW Zrcadlo art SHORA YELLOW
 

Symetrico art

Symetrico Art 03 LogoLift cabin SYMETRICO is made up of symmetric laminated panels.

The back wall of the cabin is equipped with vent holes of square or rectangle-sections.
One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.



The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:
BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC dors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour



Symetrico Art 03b Logo Symetrico Art 04 Symetrico Art 04b Symetrico Art 05  Symetrico Art 05b

Symetrico

symLift cabin SYMETRICO is made up of symmetric laminated panels.

The back wall of the cabin is equipped with vent holes of square or rectangle-sections.
One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.



The front entrance mouldings can be adapted to the type of cabin door.

Two types of cabin door are available:
BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

                         Symetrico Green  Symetrico Orange B  sym 2r Symetrico yellow

Retro

ret
The back wall of lift cabin RETRO is equipped with a mirror, handrail and vent holes of square or rectangle-sections. This wall is ready for mounting a cabin panel or button cassette.


The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

 

 

 

 

                  Retro Red Retro Blue Retro Lachsorange Retro Green

Maxair

MaxAir Yellow
Lift cabin MAXAIR is made up of laminated sections.

On the back wall is placed handrail and mirror. One side wall is ready for mounting a cabin panel or button cassette.



Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

 

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

 

 

                     MaxAir GreenB  MaxAir Blue maxa MaxAir LachsOrange

Fragmentico

Fragmentico Red
Walls  of lift cabin FRAGMENTICO are made up of three panels.

The back wall is equipped with a mirror and vent holes of square or rectangle sections.

One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.

 

The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

 

          frag Fragmentico Green Fragmentico Orange Fragmentico Violet Fragmentico Yellow

Asymetrico Art

asdym art The lift cabin ASYMETRICO ART is the design variant of Asymetrico cabin.

The side wall of this cabin is made up of asymmetric laminated sections in various colours.

The back wall is fitted with a mirror and vent holes of square or round cross-sections.

One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.

 

The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

asdym art SHORA Asymetrico Art 02Asymetrico Art 02basdym art2asdym art SHORA2

Asymetrico

asym rThe lift cabin ASYMETRICO is made up of asymmetric laminated sections in horizontal a vertical structure.
The back wall is equipped with a mirror and vent holes of square or round cross-sections.

One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.

 

The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

                   Asymetrico LachsOrange  Asymetrico yellow2  Asymetrico Predek Sv  Asymetrico TaubenBlau

Deluxo

del cervenaThe best-selling lift cabin DELUXO is made up of laminated sections with an out dented wall and ceiling. The ceiling is fitted with diode lighting fixtures, ensuring sufficient lighting of the cabin.

At the back of the cabin are vent holes of square or round cross-sections. One side wall is ready for mounting a cabin panel or button cassette. On this side wall there is also installation space for cabling and terminal boards.


The front entrance mouldings can be adapted to the type of cabin door.
Two types of cabin door are available:

BUS - automatic folding doors for lifts with manual shaft doors, versions with or without windows

AUTOMATIC doors - door leaves are made using sandwich technology, glazed or solid versions

The cabin interior can be fitted with a mirror.

The floor is provided with ALTRO heavy-duty antiskid PVC flooring.

Options: mirror, handrail, PVC type, cabin colour

      Deluxo Blue  Deluxo Green  Deluxo Orange  Deluxo Violet  Deluxo Yellow

Supply of lifts

Beta Control supplies all types of passenger and freight lifts. Supply of the lift technology is always solved completely and in compliance with applicable standards and the current technological trends.

A complete delivery includes:

  • Design of a suitable technical solution tailored for a specific building
  • Drawing up project documentation
  • Obtaining a building permit and approval
  • Drawing up a fire safety solution
  • Delivery and installation of the lift technology
  • Provision of electrical installation work
  • Provision of construction work
  • Ecological disposal of all waste
  • Warranty and post warranty services

All operations are performed with the maximum emphasis on effectiveness, high quality and occupational safety during implementation.

The guarantee of high quality of the supplied product is Beta Control’s certifications for ISO 9001, ISO 14001 a OHSAS 18001.

Our priority is the operational safety of your lift.

 

 

 

Servicing of lifts

Beta Control provides warranty and post warranty services for all operated lifts.

The aim of our company’s service activities is trouble-free operation of lifts and thus customer satisfaction. We have service facilities with a central control station and teams of experiences service engineers.

Beta Control is certified according to the ISO 9001, ISO 14001 and OHSAS 18001 standards and provides services according to ČSN 27 4002.

Lift monitoring

Lift operation is monitored continuously via the Internet. At any time the service centre’s staff has a complete overview of the operating state of your lift. The main advantage of this technology is the quick identification of lift faults, reducing the lift shutdown time for repair and minimizing service costs.

In the case of customer interest, we can provide access to the e-application in which he can monitor the operating state of his lift himself.

  wscreen1 wscreen2  wscreen3

Range of services

Basic service package:

  • 24-hour supervisory service
  • Rescue of people from the lift 24 hours a day
  • Professional overhauls
  • Regular preventive maintenance (cleaning, lubrication, adding lubricants, adjustment)
  • Free lift repairs during the warranty period
  • Access to e-application for monitoring the operating states of lifts

Extended service package:

  • 24-hour supervisory service
  • Rescue of people from the lift 24 hours a day
  • Professional overhauls
  • Operating inspections (in the case of interest, we will train the customer’s staff)
  • Regular preventive maintenance (cleaning, lubrication, adding lubricants, adjustment)
  • Free lift repairs during the warranty period
  • Access to e-application for monitoring the operating states of lifts

Additional services:

  • Professional tests
  • Complete lift repairs and renovations
  • Removal of common operating failures including the consequences of vandalism
  • Cleaning of glazed lift shafts
  • Free assessment of the technical state of lifts and a proposal for an appropriate solution

 

 

 

Lift shafts

Beta Control is a supplier of shafts, both interior and exterior. The lift shaft is a dominant feature of the communal interior spaces of a house. Emphasis is placed on the technical excellence of implementation and also on modern design. The shaft construction is variable so that it can be installed in any type of house.

If the lift shaft is located on the external wall of the house, the basic requirement is protection of the lift against adverse weather effects. Also, the lift shaft becomes a striking architectonic feature of the whole house; therefore special emphasis is placed on timeless design and precise execution of all details.

vnitrni sachta venkovni sachta sachta oranz mala fermacel mala

Interior shafts

new steel structure 

  • The jacket from clear or milk shatterproof glass
  • The most frequent location in the space of the staircase mirror between staircase arms
  • The weldment made of closed steel sections
  • The top coat is made by two-component polyurethane paints according to the RAL colour chart

 

recontruction of an existing lift shaft

  • Replacement of unsuitable netting or wire-glass with Fermacell, Cetris or Diamant panels, or with shatterproof glass
  • The panels painted in a colour of your own choice
  • Location in the space of the staircase mirror between staircase arms, opposite the staircase, next to the staircase

                      

Exterior shafts

  • The steel structure jacketed with clear or milk shatterproof glass 
  • Protection of the lift against adverse weather effects
  • Perfect solution in compliance with applicable standards
  • Safety
  • Modern design

Implementation

WHAT YOU CAN EXPECT...

If you decide to refurbish or build a new lift, you will surely appreciate some information on what exactly will be happening in your house. Therefore, we have prepared a brief guide to the implementation of lift construction.

  • Singning the work contract

    Unless some of the parameters of the new lift delivery were addressed during the selection procedure, now is the right time to specify them. These include, in particular, the lift delivery date, payment terms and conditions, selection of the cabin construction and accessories, including colour design. After the contract is approved by both parties, it will be signed.

  • Preparation of the documentation

    Based on a detailed measurement on site, the design documentation for the lift will be prepared; this documentation will be used to manufacture the lift and for its subsequent installation. This stage usually takes 1 to 2 weeks.

  • Manufactoring of the lift

    Once the design documentation is prepared, the manufacturing of the new lift can begin. It is necessary to prepare a lift machine with a steel frame, a complete switchboard, including controls and electrical wiring, a lift cabin, a cabin frame, shaft and cabin doors, guides, suspension ropes, shock absorbers, a speed reducer and other safety devices. When the lift delivery also includes a new lift shaft, the material for the supporting structure and jacketing (safety glass or fibre-reinforced gypsum panels) will be provided. This stage usually takes 4 – 6 weeks.

  • Handover and takeover of the site

    Approximately one week before starting the construction work at the site, the site handover and takeover will take place. It is necessary to provide keys to the house and to a store room to be used for storing lift components, and as a room for installation technicians during construction work. Information plates with instructions for the house’s residents will be posted in the building to increase safety during the installation of the new lift. These will also state the phone number of the site manager – the contractor’s representative.

  • Delivery of materials

    It is agreed that the required materials and entire lift technology will be delivered on the first day of installation. The technology will be stored in a designated store room. Both the new machine and switchboard will be transported to the lift machine room to facilitate the subsequent installation.

  • Dismantling the old lift

    On the very same day, the dismantling of the old lift will begin. At first, the cabin and the counterweight of the old lift will be dismantled. The ropes will be removed, followed by disassembly of the lift machine, old wiring in the machine room and lift shaft. Then, the concrete stops in the lift pit and the concrete block under the lift machine will be torn down. The old shaft door will be kept in place to prevent people from falling down into the lift shaft. Depending on the type of lift, the old guides will also be disassembled.

  • Construction of a new shaft or jacketing of the existing shaft

    When the lift shaft is not made of solid masonry or prefabricated blocks, it will be necessary to solve the unsatisfactory jacketing of the lift shaft. If the existing jacket consists of a mesh or wire-glass, these unsatisfactory elements will be replaced by a certified jacket (Farmacell fibre-reinforced gypsum board to be installed onto the original steel structure, or shatterproof glass to be installed in the new steel structure).

  • Installation of a new lift
    The construction of a new lift usually begins in the machine room by installing a new drive to be connected to the new switchboard with control electronics and the main switch. After this functional connection is made, new guides will be installed, if needed, starting from the lowest floor; the ropes will be lowered down, and the platform to be used as a future base for the new cabin will be assembled. Then, the installation of guides will proceed upwards until the last part is mounted in the “head” of the lift shaft.
    Once the new guides are installed and the assembly platform becomes operational, the shaft doors come next. The doors will be dismantled, starting on the top floor, and replaced with new ones straight away. This will be followed by the installation of cabling, electronics and lighting in the lift shaft.
    Finally, the new cabin will be mounted and connected to the lift electronics. Simultaneously with this operation, the construction openings will be finished, joints sealed and the external surface of the shaft painted (unless shatterproof glass panels are used). In addition, the machine room will be painted, and the machine room floor and the shaft pit will be provided with a dustproof coating.
  • Completion of works, and testing

    After the lift installation has been completed, an installation test performed by an independent inspection engineer will follow. The compliance of all installed components with the supplied documentation, wiring of the entire lift’s electrical installation, installed components, and the functioning of all safety devices (emergency communication, door locks, shock absorbers, speed reducers, catchers, etc.) will be verified during this test. If the results are found to be satisfactory, the second test shall be carried out. This test shall be performed by an authorized body, e.g. by SZÚ (The Engineering Test Institute), to check that the lift meets all the requirements imposed on it by the applicable standards at the time of its commissioning. If everything is satisfactory, the lift can be put into regular use.

  • Handover of the finished works and documentation

    After the tests have been completed, the lift is ready to be handed over to the client. The acceptance certificate of the finished work will be issued and all lift documentation will be handed over. This includes, in particular, the lift data report, the specialised and operational inspections log, wiring documentation, lift shaft documentation, all certificates, and operating and maintenance manuals.

 

Type solutions of lifts

Beta Control’s aim is to offer the ideal technical lift solution for any house. On the basis of the most frequently used types of lift shaft, we have developed type designs whose main advantage is the speed of delivery and reduction of the acquisition cost of a new lift.

Type designs are proposed for masonry or panel lift shafts and also for lifts located in a steel structure. The innovative type design system allows a lift to be installed in any space.

The table below shows types of lift shafts and parameters of lifts that can be installed in them. The type designs of lifts for each shaft are represented in plan sections.

We offer an optimum technical solution for any house.

EN tab typova-reseni 960

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EN rez sachty typ1

 

EN rez sachty typ2

 

EN rez sachty typ3

 

EN rez sachty typ4

 

 EN rez sachty typ567

 

EN tab technicka-data 960

 

 

 

Beta Control

Fields

 

Address

Contact

About the company Lifts

Development

Beta Control s.r.o.

Phone: +420 546 223 491  

Career Safe House Training centre Cerneho 829/58 Phone: +420 515 511 201
Written about us Fuel Stations Engineering 635 00 Brno (CZ) E-mail: obchod@betacontrol.cz

1994 - 2016 © All rights reserved | Implementation GLIPS.cz